Basic Connection - Panasonic Viera TH-P65VT30D Operating Instructions Manual

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
Rear of the TV
Mains lead
AC 220 - 240 V, 50 / 60 Hz
(
TH-P65VT30P:
AC 110 - 240 V, 50 / 60 Hz
■
Clamper
Attach the clamper
Insert the
clamper in a
hole
Note
•
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
•
Do not place the RF cable under the TV.
•
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the
correct terminating plug are required.
•
If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required.
•
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
•
To obtain optimum quality picture, select either an Aerial or a cable TV network.
•
VIERA Link connection
•
Other equipment connection
•
Read the manual of the equipment, too.
10
)
Bundle the cables
hole
hooks
(p. 68)
(p. 73 - 75)
Satellite dish
RF adaptor
(supplied)
To remove from the TV: To loosen:
Set the
Keep
tip in the
pushing
hooks
both side
snaps
Set top box
Fully wired HDMI
compliant cable
snaps
knob
Aerial
RF cable
Keep
pushing the
knob