Fisher-Price Power Wheels B7659 Owner's And Assembly Manual page 12

12
Hood
Latch
Slot
• Insert a hood latch into one of the slots in the vehicle
body, near the hood area.
• Twist the base of the hood latch
the vehicle body.
• Repeat this procedure on the other side of the hood
area to attach the other hood latch to the vehicle body.
13
Hood
Slot
• Position the hood over the front of the vehicle body
as shown.
• Insert the tabs on the hood into the slots in the
vehicle body.
• Close the hood.
Assembly
Hood
Latch
/ turn to secure it in
1
4
Tabs
Slot
14
Large
Tab
Slot
• Position the windshield so that the wipers face the front
end of the vehicle.
• Insert and "snap" the two large tabs on the windshield
into the large slots in the dash.
• Pull up on the windshield to be sure it is secure.
15
• Fit and hold the brush guard against the front bumper.
• Insert two #10 x 1" screws through the front of the brush
guard and into the front bumper.
•Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
12
Windshield
Wipers
Large Slots
Front Bumper
Brush Guard
Large
Tab