Roger Beep; Ctcss (Continuous Tone Coded Squelch System) - Uniden UH8060NB Owner's Manual

Operation

Roger Beep

1. Press [MENU/ENTER] five times.
The roger beep setting flashes.
2. Press /
setting between ON or OFF.
3. Press [MENU/ENTER] to store the
setting.
4. Press and hold [MENU/ENTER] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

CTCSS (Continuous Tone Coded Squelch System)

Press / the desired channel to use CTCSS.
Press [DCS/CTCSS].
CTCSS icon flashes.
Press / on the Remote SPK/MIC to
select the desired CTCSS code 01 - 38.
Press [DCS/CTCSS] once to store the new
setting.
To turn off CTCSS (or DCS) select the oFF code
during setting.
UNIDEN UH8060NB
to change the
22
UHF CB Transceiver