Disposal - Zanussi ZVT 64 X User Information

Problem
is lit
and number are displayed
If you are unable to remedy the
problem by following the above
suggestions, please contact your
local Service Force Centre.
1
Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
3
If the appliance has been operated incor-
rectly, the engineer's visit will be chargea-
ble, even during the warranty period.

Disposal

2
Packaging material
The packaging materials are environmen-
tally friendly and can be recycled. The
plastic components are identified by mark-
ings, e.g. >PE<, >PS<, etc. Please dis-
pose of the packaging materials in the
appropriate container at your local waste
disposal facilities.
2
Old appliance
The symbol
packaging indicates that this product may
not be treated as household waste. In-
stead it shall be handed over to the appli-
cable collection point for the recycling of
electrical and electronic equipment. By en-
12
Possible cause
Overheating protection for the cook-
ing zone has been triggered
Automatic switch off has been trig-
gered
Electronics fault
on the product or on its
Switch off the cooking zone. Switch
the cooking zone on again
Switch off the cooking zone. Switch
the cooking zone on again
Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house's wir-
ing system)
If after switching on again,
played again, call the customer
service department
suring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and hu-
man health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please con-
tact your local city office, your household
waste disposal service or the shop where
you purchased the product.
Remedy
is dis-