Haier AFL631 series Service Manual page 17

SERVICE MANUAL
Model: AFL631 & CFE633
(3) Remove the harness cover. There is a small indentation on both upper side and bottom side of
the harness cover to facilitate the removal (fig ③);
(4) Pull out the wires under the harness cover and pull out the connector (fig ④);
(5) Detach the 2 screws in the freezing air-duct onto the freezer chamber (fig ⑤);
(6) Tilt the freezing air-duct forward from top to bottom and you can remove the air-duct (fig ⑥);
(7) Take out the freezing air-duct and the fin evaporator is just behind it (fig ⑦).
When reinstalling, please connect the connector first and then mount and fix the freezing
air-duct.
Issue 200905
Rev. Ref0905S003V0
17