Specifications - Panasonic KX-FP701ME Service Manual

KX-FP701ME

3 Specifications

Any details given in these instructions are subject to change without notice.
Applicable Lines:
Document Size:
Effective Scanning Width:
Recording Paper Size:
Effective Printing Width:
Recording Paper Weight:
1
Transmission Speed* :
Scanning Density:
Photo Resolution:
Scanner Type:
Printer Type:
Data Compression System:
Modem Speed:
Operating Environment:
Dimensions:
Mass (Weight):
Power Consumption:
Power Supply:
3
Fax Memory Capacity* :
1
* Transmission speed depends on the contents of the pages, resolution, telephone line conditions and capability of the other
party's machine.
2
* Transmission speed is based on the ITU-T No. 1 Test Chart with memory scanning original mode. If the capability of the other
party's machine is inferior to your unit, the transmission time may be longer. (Refer to ITU-T No.1 Test chart (P.166).)
3
* If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.
Public Switched Telephone Network
Max. 216 mm in width, Max. 600 mm in length
208 mm
Letter: 216 mm × 279 mm
208 mm
2 2
60 g/m to 90 g/m
2
Approx. 12 s/page*
Horizontal: 8 pels/mm
Vertical:
3.85 lines/mm (standard resolution)
7.7 lines/mm (fine/photo resolution)
15.4 lines/mm (super fine resolution)
64 levels
Contact Image Sensor
Thermal Transfer on plain paper
Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
5—35°C, 20—80 % RH (Relative Humidity)
Approx. height 185 mm × width 355 mm × depth 272 mm
Approx. 3.5 kg
Standby: Approx. 1.5 W
Transmission: Approx. 12 W
Reception: Approx. 30 W (When receiving a 20% black document)
Copy: Approx. 40 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
120 V AC, 60 Hz
Transmission: Approx. 25 pages
Reception: Approx. 28 pages
(Based on the ITU-T No. 1 Test Chart in standard resolution, without using the Error
Correction Mode.)
8