Installing The Ink Film - Panasonic KX-FP701ME Service Manual

KX-FP701ME
8.3.

Installing the Ink Film

1. Open the front cover by pulling up the centre part.
2. Release the back cover by pushing the green button (
• You can also release the back cover by pushing in the
green lever ( ).
3. Open the back cover.
4. Insert the blue gear of the ink film roll into the front left slot
of the unit ( ) and the white gear of the ink film roll into
the rear left slot of the unit (
• The ink film is safe to touch and will not rub off on your
hands like carbon paper.
).
).
56
• Make sure the blue gear (
installed as shown.
5. Turn the blue gear ( ) in the direction of the arrow until
the ink film is tight ( ) and at least one layer of ink film is
wrapped around the blue core (
) and white gear ( ) are
).