D-Link DWL-2700AP User Manual page 60

2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check this
connection: Right-click on the Local Area Connection icon in the taskbar> select View Available
Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have
selected the correct available network, as shown in the illustrations below.
 Check that the IP address assigned to the wireless adapter is within the same IP address range as
the access point and gateway. Since the DWL-2700AP has an IP address of 192.168.0.50, wireless
adapters must have an IP address in the same range, e.g., 192.168.0.x. Each device must have a
unique IP address; no two devices may have the same IP address. The subnet mask must be the
same for all the computers on the network.) To check the IP address assigned to the wireless adapter,
double-click on the Local Area Connection icon in the taskbar > select the Support tab and the
IP address will be displayed. Please refer to Checking the IP Address in the Networking Basics
section of this manual.)
 If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the appropriate
section in Networking Basics. If you are entering a DNS Server address you must also enter the
Default Gateway Address. (Remember that if you have a DHCP capable router, you will not need
to assign a static IP address. See Networking Basics: Assigning a Static IP Address.)
D-Link DWL-2700AP User Manual 0