Dtim; Wmm; Antenna Diversity - D-Link DWL-2700AP User Manual

DTIM:

Fragment Length:
RTS Length:
Radio:

WMM:

Wireless B/G:
Antenna Diversity: Select Diversity to allow the DWL-2700AP to automatically
*Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
factors may adversely affect wireless signal range.
D-Link DWL-2700AP User Manual
(Delivery Traffic Indication Message) - Select a setting between 1
and 255. 1 is the default setting. DTIM is a countdown informing
clients of the next window for listening to broadcast and multicast
messages.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting.
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended.
Select ON or OFF.
(Wi-Fi Multimedia) Improves the user experience for audio, video,
and voice applications over a Wi-Fi network. This feature is enabled
by default, uncheck to disable.
Select Mixed for both 802.11b and 802.11g, 11b for 802.11b
only, or 11g for 802.11g only.
switch to the antenna with the better RSSI value. Selecting Left
Antenna will not allow the DWL-2700AP to switch antenna and
the radio will use the left antenna (facing the AP) to transmit and
receive packets. Selecting Right Antenna will not allow the
DWL-2700AP to switch antenna and the radio will only use the
right antenna (facing the AP) to transmit and receive packets.