Options Adjustments - Panasonic TH-103PF12T Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Item
Weekly Command Timer Sets Weekly Command Timer. (see page 58)
Memory lock Locks or unlocks saved pro¿ les. Also for setting passwords. (see page 32)
On:
• Power on display
• Input signal switch display
Onscreen display
• No signal display
• Mute and the remaining time of off-timer after
Off:
Off
Adjusts the input signal when the unit is turned on.
Notes:
• Only the adjusted signal is displayed. (see page 14)
Initial INPUT
• Signal can be displayed when the Terminal board is installed.
• This menu is available only when "INPUT lock" is "Off".
• When a dual input terminal board is attached, A or B is displayed depending on the selected input signal.
Press
Off
Off:
Initial VOL level
On:
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
Press
Off
Off:
On:
Maximum VOL level
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu if
Press to display the SET UP menu.
Press to select "OSD LANGUAGE".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Displays all the following on screen.
Hides all the items above from view.
PC INPUT1
(Ex. INPUT1A, INPUT1B)
button to adjust the volume when the unit is turned on.
On
Sets normal volume.
Sets your preferred volume.
you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
button to adjust the maximum volume.
On
Sets auto maximum volume.
Sets your preferred maximum volume.
becomes the same as the "Maximum VOL level".
you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Adjustments
was pressed.
INPUT2 INPUT3
Options
Weekly Command Timer
Onscreen display
Initial INPUT
Initial VOL level
Maximum VOL level
INPUT lock
Button lock
Remocon User level
Options
Options
Shipping
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Display size
Studio W/B
Studio Gain
Options
Slot power
Power On Screen Delay
Clock Display
All Aspect
Auto Setup
Rotate
Serial Slot Select
1/3
Memory lock
On
Off
Off 0
Off 0
Off
Off
Off
2/3
Enable
Normal
0
Off
Off
Off
Off
Off
3/3
O f f
Off
Off
Off
Manual
Off
Slot2
55