Station Relocation; Code Restriction, Dial Block - NEC Univerge SV8100 DT310 User Manual

To allow calls to ring through and have the
Note:
message displayed on the calling extension's
display, cancel DND by pressing the DND key
+ 0 (DND key (Service Code 751: Code 03).
To cancel a message:
1. Press the Speaker key.
2. Press the Text Message key
(Service Code 751:18+).
3. Press Speaker to hang up.
2-14 THU

STATION RELOCATION

To exchange two terminals:
1. Pick up the handset or press the Speaker key.
2. Dial the Extension Data Swap Service Code – not
assigned at default.
3. Dial the Extension Data Swap Password – not
assigned at default.
4. Dial the extension to be swapped with or relocated
to.
5. When successfully completed, a confirmation tone
will be heard and the display will show "completed".
4:20PM
CANCEL
6. Press the Speaker key twice.

CODE RESTRICTION, DIAL BLOCK

To set Dial Block:
1. Press the Speaker key.
2. Dial 600 (default).
3. Dial the 4-digit Dial Block Code (user defined).
4. Dial 1.
The confirmation tone is heard.
Note:
5. Press the Speaker key to hang up.
To release Dial Block:
1. Press the Speaker key.
2. Dial 600.
3. Dial the 4-Digit Block Code.
4. Dial 0.
The confirmation tone is heard.
Note:
5. Press the Speaker key to hang up.
At default, Dial Block restriction Class per
Note:
Extension is denied.
48