Microphone Control; Speakerphone Calls; Group Listen - NEC Univerge SV8100 DT310 User Manual

MICROPHONE CONTROL

1. Press the MIC key.
2. A lit MIC LED indicates that the MIC is on.

SPEAKERPHONE CALLS

1. Press the Speaker key and the Speaker LED lights.
2. Ensure that the MIC LED is lit.
3. Place an internal or outside call.
4. Converse.
5. Press the Speaker key to disconnect the call.
The handset may be used at any time during
Note:
the conversation. To resume handsfree
operation or to monitor a call, press the
Speaker key (the Speaker LED lights) and
replace the handset.

GROUP LISTEN

To initiate Group Listen:
1. Place or answer a call using the handset.
2. Press the Speaker key twice (do not hang up).
The Speaker LED flashes.
Note 1:
You can talk to the caller through the handset.
Note 2:
Your coworkers hear your caller's voice over
your telephone's speaker.
When you press the Speaker key once, you
Note 3:
turn your Speakerphone on. The second press
turns on Group Listen. Pressing the Speaker
key a third time cancels the Group Listen
feature.
2-13 WED
GROUP LISTEN
Conf
33
5:40PM