Roland Fantom G6 Workshop Manual page 8

To select a sound from a sound bank in an external device simply by
selecting a patch on the Fantom-G, set the desired sound's Bank Select
MSB and LSB values on the Single Play screen using the Type and Bank
parameters, go to the Patch List screen and select the sound's Program
Change value, and then save this setup as a Favorite.
Highlight the desired Program Change value, or NO SEND if you don't
1
want to transmit one.
Click F8 (select) to return to the Single Play screen.
2
Patch List Screen Tools
QWERTY Searching on the Patch List Screen
On Page 4 of the Power User Control Fantom-G Workshop booklet, we
introduced QWERTY searching, a valuable tool you should certainly take
advantage of in the Patch List window.
Previewing Patches and Rhythm Sets
When you're looking for patches and rhythm sets on the Patch List screen,
the Fantom-G's Preview feature lets you audition each sound before
committing to its selection. To audition a patch or rhythm set, highlight it
and then hold down F7 (Preview).
By default, the Preview feature's set to play a musically appropriate phrase
for the currently selected patch or rhythm set.
Customizing the Preview Feature
If a musical phrase isn't the way you want to check out your sounds, you can
change the way Preview works. Here's how:
Press the MENU button, and then click F2 (System).
1
Select the Preview tab on the left side of the screen.
2
Select the Preview Mode parameter. Set it as desired to:
3
•
PHRASE— This is the default setting with which the Fantom-G
chooses an audition phrase for the sound to play. (If you select
PHRASE, skip down to Step 5 below.)
•
CHORD— The Fantom-G plays a four-note chord each time you
click F7 (Preview) on the Patch List screen.
•
SINGLE— The Fantom-G plays one of a series of four notes each
time you click F7 (Preview) on the Patch List screen.
If you selected CHORD or SINGLE, set up the notes you want the
4
Fantom-G to play for Preview. There are two parameters for each of
the four Preview notes:
•
Preview [1-4] Note Number—
played.
•
Preview [1-4] Velocity—
the note plays, with a value of 127 being full volume.
Click F7 (Sys Write) to store your Preview settings, and then press EXIT
5
to leave the screen.
allows you to select the note to be
allows you to select the volume at which
8