Roland Fantom G6 Workshop Manual page 7

Beneath the patch list are the MIDI Bank Select and Program Change
values for the selected patch, information you'll need if you wish to
select Fantom-G patches from an external MIDI device such as a DAW.
Selecting an Internal Rhythm Set for the Keyboard
Click F4 (Rhythm Set) if it's not already blue.
1
Highlight the desired rhythm set.
2
Click F8 (select) to load the rhythm set into work RAM.
3
Selecting Keyboard ARX Patches and Rhythm Sets
When you set the Single Play screen's Part Group parameter to
2, and then click F1 (Patch List), the Fantom-G shows you a patch list screen
that contains the sounds available on the selected ARX board.
The Patch List screen for ARX-01
Highlight the desired sound.
1
Click F8 (select) to load the selected sound into work RAM.
2
EXP 1 or EXP
The Patch List screen for ARX-02
Selecting a Sample Set for the Keyboard
A sample set is a type of patch that plays samples already loaded in
your sample RAM.
Click F5 (Sample Set) if it's not already blue.
1
Highlight the desired sample set, and then click F8 (select) to load it
2
into work RAM.
Selecting an External Sound to Play on the Keyboard
The External Patch List screen allows you to transmit a MIDI Program
Change value to your external MIDI device in order to select a sound from
its currently selected sound bank.
If you don't want to change sounds in your external device from the
Fantom-G, select NO SEND on the Patch List screen.
7