Verifying The Leds - Cisco 828 Quick Start Manual

Verifying the LEDs

Verifying the LEDs
The following table describes the normal LED pattern and what to do if the router displays an abnormal
pattern. For more information on all LEDs, see the Cisco 828 Router and SOHO 78 Router Hardware
Installation Guide.
LED
OK
G.SHDSL CD
G.SHDSL RXD
G.SHDSL TXD
ETHERNET 1, 2, 3,
ETHERNET 4
ETHERNET RXD
ETHERNET TXD
About the Product CD
The Cisco 800 and SOHO Series Product Documentation CD contains the technical publications for the
Cisco 800 and SOHO series routers.
Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide
8
Normal
Pattern Explanation
On Power is supplied to
the router.
On G.SHDSL line is
connected.
Blinks G.SHDSL port
receives data.
Blinks G.SHDSL port
sends data.
On Ethernet device is
connected.
On Ethernet device is
connected.
Blinks Ethernet port is
receiving a packet.
Blinks Ethernet port is
transmitting a
packet.
If Abnormal Pattern
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, toggle TO HUB/TO PC button (if
set to TO HUB [in], reset to TO PC
[out] or vice versa). If still off, see the
Cisco 828 Router and SOHO 78 Router
Hardware Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
If off, see the Cisco 828 Router and
SOHO 78 Router Hardware
Installation Guide.
78-12839-01