Chapter 4
Initial Configuration
*Sep 25 23:33:42.457: GigabitEthernet0/0/20: Port License not activated, activate license
to use port.
*Sep 25 23:33:42.553: GigabitEthernet0/0/21: Port License not activated, activate license
to use port.
*Sep 25 23:33:42.649: GigabitEthernet0/0/22: Port License not activated, activate license
to use port.
*Sep 25 23:33:42.745: GigabitEthernet0/0/23: Port License not activated, activate license
to use port.
*Sep 25 23:33:42.841: TenGigabitEthernet0/0/24: Port License not activated, activate
license to use port.
*Sep 25 23:33:42.937: TenGigabitEthernet0/0/25: Port License not activated, activate
license to use port.
*Sep 25 23:33:42.985: TenGigabitEthernet0/0/26: Port License not activated, activate
license to use port.
*Sep 25 23:33:43.128: TenGigabitEthernet0/0/27: Port License not activated, activate
license to use port.
*Sep 25 23:33:47.106: %LINK-3-UPDOWN: Interface GigabitEthernet0/0/0, changed state to up
*Sep 25 23:33:47.829: %LINEPROTO-5-UPDOWN: Line protocol on Interface
GigabitEthernet0/0/0, changed state to up
Router>
During the boot process, observe the system LEDs. After the router has booted, the green STAT LED
comes on and stays on.
Verifying the Front Panel LEDs
The front-panel indicator LEDs provide power, activity, and status information useful during bootup. For
more detailed information about the LEDs, see the
Verifying the Hardware Configuration
To display and verify the hardware features, enter the following commands:
•
•
Checking Hardware and Software Compatibility
To check the minimum software requirements of Cisco IOS-XE software with the hardware installed on
your Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router, Cisco maintains the
Software Research tool on Cisco.com. The tool provides the minimum Cisco IOS-XE requirements for
individual hardware modules and components.
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
show version—Displays the system hardware version, the installed software version, the names and
sources of configuration files, the boot images, and the amount of installed DRAM, NVRAM, and
flash memory.
show diag slot—Displays the IDPROM information for the assemblies in the chassis.
LED Indicators, page 1-13
Powering Up the Router
section.
4-7