Range Control Feature; Using The Locks Menu; Entering The Pin Code; If You Cannot Remember Your Pin Code - Toshiba 15CV100U Owner's Manual

®
Using the Dolby Digital Dynamic

Range Control feature

This dynamic range control feature causes the
ATSC dynamic range to be further compressed,
allowing you to switch from ATSC to analog
broadcasts at the same dynamic range.
1
From the Sound menu, press
select Audio Setup and then press
2
to select Dolby Digital
Press or
Dynamic Range Control and then press
or to select Compressed. When
Standard is selected, the audio is output with
minimal compression.
3
To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press
Note:
This item will be grayed out for NTSC
•
signals, Video, ColorStream, and PC inputs.
The Dolby Digital Dynamic Range Control
•
will function in relation to Optical Output
Format (PCM mode).
42
Chapter 6: Using the TV's features
or to
.
.

Using the Locks menu

The Locks menu includes the Enable Rating
Blocking, Edit Rating Limits, Input Lock, Control
Panel Lock, GameTimer and New PIN Code
features. You can use these features after entering
the correct PIN code.

Entering the PIN code

1
Press and then press
Locks.
2
Press , which displays the PIN code entry
screen.
• The Lock System screen appears if a PIN
code has not been stored. Press the Channel
Number buttons to enter a new four-digit
code, enter the code a second time to confirm,
and then press .
• The Locks/Active screen appears if the PIN
code is already stored. Use the Channel
Number buttons to enter your four-digit code
and then press .
If the wrong PIN code is entered, the message
"Incorrect PIN code, please try again!" appears.
Highlight Retry and then press
again and then press .
When the correct PIN code is entered, the Locks
menu opens.
If you cannot remember your PIN
code
While the PIN code entering screen is displayed,
press four times within five seconds. The PIN
code will be cleared and you can enter a new PIN
code.

Changing your PIN code

1
From the Locks menu, press
PIN code entering screen.
2 Enter your four-digit PIN code and then press
.
3
Press or to select New PIN Code and
then press .
4 Press the Channel Number buttons to enter a
new four-digit code. Reenter the PIN code to
confirm it.
5
Press . The new PIN code is now active.
or to highlight
. Enter the code
to display the