Access Code - Motorola NVG510 Administrator's Handbook

Administrator's Handbook
Link: Access Code
Access to your Gateway is controlled through an account named Admin. The default Admin password for your
Gateway is the unique Access Code printed on the label on the side of your Gateway.
As the Admin, you can change this password to a different one of your own choosing up to 32 characters long.
The new password must also include two characters from any these categories: alpha, number, and special char-
acters.
Example: "fru1tfl13s_likeabanana"
Use New Access Code
Enter your Old Access Code, your New Access Code, and click the button. The new
Access Code takes effect immediately.
Use Default Access Code
You can always return to the original default password by clicking the button.
26