VSS7390/01T Switcher | Installation Manual | Chapter 2
Note
For detailed information on the on screen menus refer
to the System Settings Part.
When completed the following screen will appear:
C O N F I G U R A TIO N
W I ZAR D C OMPLETED
2.4 SYSTEM SETTINGS
The system settings can be configured to your own
requirements. The system is setup via on-screen menus.
To access the menu options:
•
Press the MENU button. Toggle to switch on/off.
The ROTARY wheel controls the menu navigation as
described in the Operation Instructions.
At the end of this chapter you will find the complete
menu structure in a diagram.
2.4.1 Main Menu
After pressing the menu button the following menu will
be displayed:
M A I N M E N U
HISTOR Y
SWITCH TO PLAYB ACK VIEW
VIEW SETTINGS
TIME / DATE
SYSTEM SETTINGS
Note
HISTORY, SWITCH TO PLAYBACK VIEW,
VIEW SETTINGS and TIME/DATE functions are
described in detail in the Operation Instructions.
Remark
After entering the system settings, alarms are disabled.
2.4.2 System Settings Menu
With the System settings menu you can configure the
system according to your own requirements.
Configurations that can be changed are:
Bosch Security Systems | 2003-06
Select system settings from the main menu and the
following menu will appear:
M A I N M E N U
SYST EM SET T I NGS
SEQUENCE
ALARMS
AUX-OUTPUT
R E C O R D E R
INST ALLATION
SER VICE
2.4.3 Sequence
You can change the sequence dwell time from 01 sec to
30 secs. Sequence/dwell time is the length of time an
image is displayed before the next image in the
sequence is shown.
M A I N M E N U
SYSTEM SETTINGS
S EQU ENCE
D W E L L TI M E
2.4.4 Alarms
The Alarm Profiles can be accessed from the Alarm
menu.
M A I N M E N U
SYSTEM SETTINGS
A L A R M S
ALARM DURATION
AUT O ACKNOWLEDGE
ALA R M PR OF ILE DA Y
ALARM PROFILE NIGHT
DAY / NIGHT S WIT CH
ALARM
This defines the period of time (5
sec. to 15 min.) that the alarm
DURATION
beeper and the alarm relay are acti-
vated, unless the operator acknow-
ledges the alarm.
AUTO
ON/OFF When there is an alarm,
the system automatically acknow-
ACKNOWLEDGE
ledges the alarm and replays the
event (if event replay is activated)
after the programmed alarm duration
has expired (can be set from 5 sec.
to 15 min).
EN | 6
0 5
S E C
0 5 S EC
OFF
NONE