Making Copies; Initial (Default) Settings - Toshiba e-Studio 452 Operator's Manual

2. Making Copies

Initial (Default) settings

When the power is turned on, when the energy saving mode is cleared, and when the [FUNCTION
CLEAR] button on the control panel is pressed, various setting items are automatically set. These items
are called the initial (default) settings. Set originals after placing paper or confirming that there is paper in
the drawers. When the [START] button on the control panel is pressed with any of the settings unchanged,
copies are made in the initial (default) settings. You can make copies as desired by setting various copy
modes.
The table below lists the various items of the initial settings at the time of installation of this equipment.
Item
Reproduction ratio
Copy quantity
Paper selection
Original -> Copy
Density adjustment
Original mode
Finishing mode
Feeding mode when originals are placed on the
Reversing Automatic Document Feeder (optional)
• These initial settings can be changed as desired. See the User Functions Guide for details.
Initial (Default) setting
100%
1
Automatic Paper Selection (APS)
1-Sided -> 1-Sided
Automatic copy density adjustment
TEXT/PHOTO
Placing originals on the original glass: Non-sort/
Non-staple mode
Placing originals on the Reversing Automatic Doc-
ument Feeder (optional): Sort mode
Continuous feed mode
2
65