Toshiba e-Studio 452 Operator's Manual page 330

10."Check paper size setting on control panel for drawer N" (Cont.)
During copying (using the bypass tray)
1
Turn the power of the equipment OFF.
• You cannot shut down the equipment.
2
Remove the jammed paper.
P.278 "5.Jam Symbols"
3
Remove all the paper from the bypass
tray.
4
Turn the power ON.
10
5
Place paper on the bypass tray and select the paper size.
P.73 "3.Bypass Copying"
6
Place the original and try to copy again.
When "POWER FAILURE" appears, press the [FUNCTION CLEAR] button twice to clear the
message. See
328
10.WHEN THIS MESSAGE APPEARS
P.323 "8."POWER FAILURE"" for details.