Turning Power On / Off; Turning Power On - Toshiba e-Studio 452 Operator's Manual

2. Turning Power On / Off

Turning power on

Open the switch cover, and then turn the power switch on.
1
• The equipment starts warming-up. "Wait Warming Up" appears during warming-up.
• While the equipment is warming up, you can use the auto job start function.
( P.70 "Scanning the next originals during copying (Auto job start)")
The equipment will be ready for copying after about 20 seconds and "READY" appears.
When you turn the power of the equipment OFF, do not simply turn the power switch to turn it off but be
sure to shut it down. (
When the use of the equipment is managed under department management or user management func-
tion, you need to enter the department code or user information before making a copy. For details, see
P.35 "When department or user management is used".
34
1.BEFORE USING EQUIPMENT
P.40 "Turning power off (Shutdown)")