Radio Disassembly - Detailed
6.4
Disassembly of Control Heads
1.
To dismount the control head housing from the back housing, insert the dismantling tool in the
groove between the two housings as shown in Figure 2-6.
2.
Press the dismantling tool until the snap connectors on the side of the back housing release
from the control head.
3.
Disconnect the speaker socket and pull out the speaker (with speaker tube) by stretching the
control head housing, Figure 2-7 (GM338 only).
The speaker and speaker tube are glued together to form one unit.
NOTE
Figure 2-6 Control Head Back Housing Removal
Figure 2-7 Speaker and Speaker Tube Removal
2-7
ZWG0130214-O
ZWG0130218-O