Connecting The Monitor - BenQ VZ Series User Manual

Connecting the monitor

VZ2250/VZ2350
1
No.
1 AC power input jack
2 HDMI socket
3 DVI-D socket
4 D-Sub socket
5 Audio Line In
1. To protect equipment, always turn off the PC and LCD monitor before connecting.
2. Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video
socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer
video socket.
3. (Optional – Requires a video card with DVI port) - Connect one end of the DVI cable to the back
of the monitor and connect the other end to the computer's DVI port.
4. Turn on your monitor and computer. If your monitor displays an image, installation is complete.
If it does not display an image, please refer to
4
3
Description
VZ2350HM
1
"Troubleshooting" on
8
2 3 4 5
19.