Table of Contents
Advertisement
The control panel
No.
1
2
3
4
5
Source / Auto / Exit
• Press and hold the AUTO key for 3 serconds to adjusts vertical position, phase, horizontal
position and pixel clock automatically.
• Press the AUTO key to switch to a desired input source, and confirm with the MENU key.
• When in the OSD menu, press to exit.
ECO / -
• By default, the key is the hot key for ECO.
• When in the OSD menu, press for Down/Decrease adjustment.
Volume / +
• By default, the key is the hot key for Volume.
• When the input source is HDMI, press to select the audio source, and confirm with the MENU
key.
• When in the OSD menu, press for Up/Increase adjustment.
4:3 or wide / +
• By default, the key is the hot key for 4:3 or wide image aspect ratio. (Not available if the screen
size is 4:3 or the input signal resolution is wide already.)
• When in the OSD menu, press for Up/Increase adjustment.
Menu / Enter
• Press to display the OSD menu.
• When in the OSD menu, press to confirm the selection.
Power
Press the
button to turn on / off the monitor.
1
VZ2250 / VZ2350
Description
Source / Auto / Exit
ECO / -
4:3 or wide / +
Menu / Enter
Power
5
2
4
3
No.
1
Source / Auto / Exit
2
ECO / -
3
Volume / +
4
Menu / Enter
5
Power
10
VZ2350HM
Description
Advertisement
Table of Contents
