Changing The System Time And Host Name; Changing The Switch Fabric-Channel Configuration - Fortinet FortiSwitch-5003B System Manual

Additional configuration

Changing the system time and host name

Changing the switch fabric-channel configuration

34
edit f8/slot-14
set active-connection slot-14
end
The FortiSwitch-5003B board responds with a confirmation message. Accept the change
and the FortiSwitch-5003B board reboots.
You can use the FortiSwitch-5003B CLI to configure other basic system settings such as
using config system global to set system time settings and change the system host
name. Execute commands are also available for setting the system time and date and
backing up the configuration.
If you are using the FortiSwitch-5003B system for link aggregation or just to pass VLANs
you need to use the config switch fabric-channel command. This command has
several options that can be used to:
• Change global switch settings.
• Add VLANs to and changes the native VLANs of the FortiSwitch-5003B interfaces.
• Configure packet mirroring.
• Configure physical port settings for each fabric port.
• Configure MTSP.
• Aggregate FortiSwitch-5003B fabric interfaces into trunks.
Quick Configuration Guide
FortiSwitch-5003B System Guide
01-400-134822-20120216
http://docs.fortinet.com/