Software Update; Basic Information; Usb Stick; Software Download For Updates Over Usb - Loewe Individual 55 Compose 3D Operating Instructions Manual

Individual tv series
Hide thumbs Also See for Individual 55 Compose 3D:
Table of Contents

Advertisement

Software update

Basic information

You can update the software on your TV set. In the software update
(package update) all the software versions in the TV are scanned and
updated as required.
Here you can load up a new piece of software from different sources
(where present):
Current software versions can be downloaded from the Loewe Internet
site (see right-hand column) and installed on your set using a USB stick
(see page 135).
If your TV set is connected to the internet, the TV set can be updated
directly over the internet (see page 136).

USB stick

Requirements of USB stick
USB sticks tested by Loewe and compatible in type and format can be
ordered from the Loewe dealer using the article no. 90456.900.
If you would like to use your own USB stick, please follow these tips/
conditions:
Formatting in FAT32.
Only one partition.
Do not use encrypted USB sticks.
Do not use USB sticks that simulate a CD ROM drive.
There may be no hidden files on the device.
For some types of device, the construction of the USB stick is significant.
Maximum dimensions in mm: 70x20x10.
If in doubt, the USB stick should be formatted as "FAT32" without
"extended attributes".
- 134

Software download for updates over USB

Software download from the Loewe Internet site
Where available, you can download new software for your TV set from
our homepage.
To do this, visit our homepage at:
http://support.loewe.tv
(International),
http://support.loewe.tv/uk (United Kingdom and Republic of Ireland),
http://support.loewe.tv/au (Australia) or
http://support.loewe.tv/nz (New Zealand)
Choose Register now or Register free-of-charge on the support homepage.
Follow the individual registration process instructions.
After the successful registration process and subsequent login to the
support homepage you have to register your set (have the article number
and serial number ready – both of these are on a label stuck to the back
of the set or can be seen under TV equipment in the index of the TV set
(see page 17).
Then you will get a list of downloadable contents for your TV set, includ-
ing the software. Download the data and unpack all the files in this ZIP
archive into the main directory of your USB stick.
Then carry out the software update as described below.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents