Before You Start; System Requirements - NETGEAR Sprint 6100D Get Started

Before You Start

System Requirements

The following items are required to use your
LTE Gateway 6100D:
• One or more computers that support Wi-Fi
(802.11 a/b/g/n or 802.11ac or 802.11 a/b/g/n/ac)
• Web browser (required if you'll be using the
browser interface to view status and to
configure settings). The following browsers
are supported:
• Internet Explorer (version 8 and above)
• Firefox (version 3.6.24 and above)
• Chrome (version 30 and above)
• Safari (version 5.1.7 and above)
• If you'll be connecting to your Gateway
through Ethernet:
• Computer with an available Ethernet port
Attach the Antennas
The Gateway comes with two external
antennas that are interchangeable. For best
performance, connect both antennas.
1. Align the antennas with the antenna posts on
the router.
2. Attach the antennas on the threaded antenna
posts, ensuring that the connection is secure.
3. Adjust the antennas so that they are vertical.
Place Your Gateway
1. Place your Gateway in a location that
receives a strong wireless signal, such as
near a window.
2. Use the Signal Quality LED
the Gateway for the best signal strength.
to position