Dv/1394 Debug Mode - Pioneer DVR-210-S Manual

DV/1394 DEBUG MODE

Press the ESC, DISP, then "3" keys, in that order.
1
2
3
4
5
6
7
8
9
10
11
12
13
No. Item
Init
AV
1
DV
INT4
2
GUID
iPCR
3
oPCR
4
GUID
VN
5
MN
TM
TS
CT
6
WP
PS
OS
7
[DVdecode:XXX]
61.
(DV/1394) Init:OK AV:01 DV:01
[Recoder] GUID:00E036000160001 IRM
iPCR:C03F0000 oPCR:0000007A
[DV] GUID:0080880303480E96
VN:VICTOR MN:GR-D50K
TM:C3 TS:75 CT:32 WP:01 PS:FF OS:00
[DVdecoder:Yes]
TC:00h20m35s02f RD:02/02/05 RT:10h34m50s
ASPECT:4:3 CGMS:000000 APSTB:00 DEC:525-60
SF:32kHz QU:12bit AMODE:4) Stereo
[DVencode:No]
TC:--h--m--s--f RD:--/--/--/-- RT:--h--m--s
ASPECT:-------- CGMS:-- APSTB:--
Description
Whether the initialization of uPD72893A
(1394LINK & DVcodec IC) has been completed
(OK) or not (NG)
Number of AV devices on the local bus
Number of DV devices on the local bus
Number of executing INT4(PIO) interrupt
processing routines until a POWER ON
notification arrives from uPD72893A (normally, 02)
GUID set in ConfigROM of the unit
iPCR value of the unit
oPCR value of the unit
GUID set in ConfigROM of the connected DV
device
Vendor name set in ConfigROM of the connected
DV device
Model name set in ConfigROM of the connected
DV device
Transport Mode data obtained from the DV device
Transport State data obtained from the DV device
Cassette Type data obtained from the DV device
Copy-protection data obtained from the DV device
Power-state data obtained from the DV device
Output signal mode data obtained from the DV
device
Whether Yes (in the process of requesting DV
input) or No is indicated in XXX
INT4:02
Boldface alphanumerics
Non-boldface alphanumerics : Variable indications
In a case of NG, communication with uPD72893A may have
failed.
If the number does not become 01 even if a DV device is
connected, identification of that device fails.
In a case of ROOT (IRM), IRM is displayed at the rightmost of
the GUID indication
Data are displayed only if one DV device is identified. If the
connected DV device is ROOT (IRM), IRM is displayed at the
rightmost of the GUID indication
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
Data are displayed only if one DV device is identified.
(Depending on the device, the vendor name may not be set in
ConfigROM.)
Data are displayed only if one DV device is identified.
Normally, Yes is indicated only when CH is set to DV
: Fixed indications
Remarks