Pioneer DVR-210-S Manual page 21

Signal Flow
(Playback)
The playback MPEG signals from the R6 DVD drive enter the ATA
interface on IC1001 and are audio/video decoded and subject to 3D digital
noise reduction. Additional settings are available in the user menu to adjust
picture quality: Pure Cinema, Y noise reduction, C noise reduction, QNR
(block noise reduction), Detail, White level, Black level, Black setup, Hue
and Chroma levels can all be adjusted separately or factory presets can be
selected. IC1001 also incorporates a Progressive converter that can be
activated in the user menu.
Decoded Audio and Video signals output IC1001 and enter the TUMJ assy
as composite, S, or component. Audio output from IC1001 to the TUMJ assy
will be analog and digital.
Playback is also possible from the DV (1394) connector
20.