Ptt Call To Group - AT&T CL84102 User Manual

Multiple handset use
Push-to-talk (PTT)
�TT call to group
When there are multiple handsets registered to the phone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-five calls
when one to five handsets are registered, and a maximum of one-to-four
calls when six or more handsets are registered. The first four registered
handsets will be eligible to use this feature. Other handsets can only use PTT
for one-to-one calls.
To call the group using a cordless handset:
1. You have three ways to call multiple devices. When the handset is not in use:
Press and hold �U�H TO TAL� until the handset shows Connecting to
•
group...
Press �U�H TO TAL�. Press q
•
/�ELECT or �U�H TO TAL� then your handset shows Connecting
MENU
to group...
• Press �U�H TO TAL�. Press TONE followed by # (pound key). The
handset shows Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold �U�H TO TAL� when you want to speak.
Speak towards the handset. Your voice is broadcast to all eligible devices.
3. Release �U�H TO TAL� after speaking.
4. Any extension can reply (see Answer a �TT call on page 47).
To call multiple devices using the telephone base:
1. You have three ways to call multiple handsets. When the telephone base is
not in use:
Press and hold �TT until the screen shows Connecting to group...
•
Press �TT. Press q
•
�TT then the telephone base shows Connecting to group...
• Press �TT. Press TONE followed by # (pound key). The screen shows
Connecting to group...
When the connection is made, both the caller and the destination parties
hear a beep. The speakerphones on all other devices automatically activate.
2. You need to press and hold �TT when you want to speak. Speak towards
the telephone base. Your voice is broadcast to all devices.
3. Release �TT after speaking.
4. Any extension can reply (see Answer a �TT call on page 47).
NOTE: After �U�H TO TAL� on the handset or �TT on the telephone base is released, the
PTT call remains open for a short time. If no one presses �U�H TO TAL� on the handset or
�TT on the telephone base within 10 seconds, the PTT call ends automatically.
or p
CID
or p
to choose Group. Press
CID DIR
46
to choose Group. Press
DIR
/�ELECT or
MENU