2.8 Kerb Climber Assembly
General
1
Check the condition of the kerb climber for any defects (refer to paragraph 3). If any defects are observed
then refer to paragraphs 4 to 5 for maintenance details and to Chapter 3 for parts information.
Tools
2
Refer to the tool list at the beginning of this Chapter.
Inspection
3
Check for the following on daily basis:
3.1
Kerb climber (6) show no sign of physical damage.
3.2
Kerb climber operates correctly.
3.3
Location pin (5), bolts, nuts and spacers are not damaged or missing
Removing and Replacing Kerb Climber Assembly
4
To remove the kerb climber proceed as follows:
4.1
Remove location pin (5) and lower right hand side of kerb climber assembly (6) from mounting
bracket (20, then slide out from left hand mounting bracket.
4.2
Remove screw (7), bolts (1), nuts (3) and spacers (4), the remove mounting brackets from side
frames.
5
Replacing the kerb climber is the reverse of removal.
02/02
MAINTENANCE
Page 2.29