Buttons
There are two sets of buttons, fixed and flexible. The fixed buttons (e.g.,
&RQI7UQ
+ROG
,
(see
Figure
Phantom) and feature buttons. The number of preprogrammed flexible buttons varies by
telephone.
Fixed Buttons
The fixed buttons are located on your dial pad and enable you to perform standard functions quickly
and easily.
Table 1
Fixed Button Definitions
Button
&QI7UQ
(Conference/
Transfer)
+ROG
Strata DK Digital Telephone 5/99
9RO
9RO
,
, and
1). The flexible buttons consist of Directory Number (Primary, Secondary,
Press to set up conference and transfer calls (see
Page
37).
Press once to hold internal or outside calls. The
Line LED flashes green at the internal hold rate.
...or press twice to enable Exclusive Hold. The
Line LED flashes green at the exclusive hold rate.
Note
Exclusive Hold enables you to place a call on hold so that only you or
somebody using a Call Pickup code at another station can retrieve it.
To retrieve a call on hold:
Press /LQH or [DN] which is on hold
...or if the call is on Exclusive Hold, from another station dial plus your
[DN], or dial plus the CO line number (001~200) that the call is held
on.
If a call is not retrieved by a certain time (set in
system programming), it recalls back to your phone.
You hear repeated recall tone (or if you are on the
phone, you hear recall tone twice).
) are standard to every Strata DK 2000-series telephone
Definitions
The Grand Tour
Buttons
0LF
0VJ
5HGLDO
,
,
,
"Conference Calls" on
HOLD LINE 10
JAN 01 SUN 12:19
HOLD LINE 201
LINE 10 RECALL
3