Message Waiting; Message Waiting Light On [Pdn] - Toshiba Strata DK User Manual

Features

Message Waiting

Message Waiting
If you call a busy station [DN] or its user does not answer, you can leave a message waiting
indication at the station. The Msg LED at the called station flashes and the user can call you
back by pressing the
people, can leave message waiting indications.)
All telephones have a standard (fixed)
by callers that called the station's [PDN]. Telephones that own [PhDNs] can also have up to
four additional (flexible) message waiting [PhDN/MW] buttons/LEDs for receiving/retrieving
messages left by callers that called the respective [PhDNs]. To use the [PhDN] message
waiting feature, your telephone needs to have [PhDN/MWs].
Up to four message waiting indications and LCD messages can be left at each [DN] or [PhDN]
at one time. The fourth message and one of the LEDs is reserved for the Message Center.

Message Waiting Light on [PDN]

To answer a Msg light
1. Press
the handset.
If you reach a station
that is busy or does
not answer, go on-
hook and press
again. The system
rotates to the next
message sender.
The LCD can show
up to three stations
that have left
messages for the
[PDN] and three for
each of your
[PhDNs].
2. Press
display them.
48
0VJ
button with the flashing LED. (Voice mail devices, as well as
0VJ
, then lift Your phone rings the station or voice mail device that set the
indication. The LED continues to flash red.
0VJ
In the example (shown at right), the
display indicates that station DN [
received a message signal from DN
[
201
6FUROO
to
0VJ
button/LED for receiving/retrieving messages left
]. The "+" indicates additional messages.
NO. 204
]
203
CALL 203-201+
Strata DK Digital Telephone 5/99