Port Forwarding - ZyXEL Communications VSG1432 Setup Manual

2.5.1 Port Forwarding

Thomas needs to configure the port settings and IP address on the Device. Traffic should be
forwarded to TCP/UDP port 6500, and UDP ports 2302 and 13139 of the server computer which has
an IP address of 192.168.1.34.
Thomas may set up the port settings by configuring the port settings for the server computer.
Click Network Settings > NAT > Add new rule and configure the screen with the following
1
values:
Service Name
External Port/s
Server IP Address
Protocol
The screen should look as follows. Click Apply.
2
Repeat steps 1 and 2 for UDP ports 2302 and 13139. The port forwarding settings you configured
3
appear in the table.
Players on the Internet then can have access to Thomas' server.
28
CivIV
Enter 6500 as the Start and End port.
Enter the IP address of the server. This is 192.168.1.34 for this example.
Select TCP/UDP. This should be the protocol supported by the server.
VSG1432 User Setup Guide