Location of controls
Wireless Camera
A
J
I
H
G
Fixing screw
Camera unit
Camera lens
Cable protection sheet
R Do not remove this sheet.
Magnet/rubber
R The magnet and rubber are used to stop the Wireless Camera from moving.
Wireless unit
Battery case
Power switch (ON/OFF)
R Set the power switch to OFF to conserve battery power during the following situations:
– When the Monitor is disconnected from the power source for an extended period of time.
– During electrical power failures.
Pair button (Not normally used.)
R Used after the Monitor and/or Wireless Camera are replaced or serviced (page 20).
Pair indicator
R Flashes/lights when pairing (not normally performed).
R When you turn the Wireless Camera's power ON, you can check the pair indicator to ensure the
power is on (page 16).
B
C
D
E
F
Getting Started
R Bottom view
K
9