Changing The Illumination Pattern And Color; Using The Timers - Sony SHAKE-100D Operating Instructions Manual

Hide thumbs Also See for SHAKE-100D:
Table of Contents

Advertisement

To exit the options menu, hold down
SHIFT, then press OPTIONS.
Changing the
illumination pattern
and color
Hold down SHIFT, then press LED
PATTERN or LED COLOR to select
the illumination pattern or color.
Hold down SHIFT, then press LED
PATTERN or LED COLOR to show
current setting. Press again to change the
illumination pattern or color on the unit
and the speakers instantaneously.
To turn off the illumination, hold down
SHIFT, then press LED PATTERN
repeatedly to select "LED OFF".
Note
If the illumination brightness is glaring, switch
on the room lights or turn off the illumination.

Using the timers

The system offers three timer functions.
You cannot activate both the Play Timer
and the Recording Timer at the same time.
If you use either with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer
You can fall asleep while listening to
music. The system turns off after the
preset time.
Hold down SHIFT, then press
SLEEP repeatedly.
To cancel Sleep Timer, press SLEEP
repeatedly to select "SLEEP OFF".
Tip
To check the remaining time before the system
turns off, press SLEEP.
Play Timer/Recording Timer
Make sure you have set the clock.
Play Timer:
You can wake up to disc, tuner, or USB
device at a preset time.
Recording Timer:
You can transfer music from a preset radio
station to a USB device at a specified
time.
1
For Play Timer:
Prepare the sound source, then press
VOL +/– to adjust the volume.
To start from a specific track or file,
create your own program (page 27).
For Recording Timer:
Tune to the preset radio station
(page 38).
2
Hold down SHIFT, then press
TIMER MENU.
3
Press
/
repeatedly to select
"PLAY SET" or "REC SET", then
press
.
4
Set the time to start playback or
transfer.
Press
/
repeatedly to set the hour/
minute, then press
5
Use the same procedure as in
step 4 to set the time to stop
playback or transfer.
6
Press
/
repeatedly to select
the sound source you want, then
press
.
For Recording Timer:
Connect a transferable USB device to
the
B port.
7
Press "/1 to turn off the system.
.
49
GB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shake-66dShake-88dShake-44d

Table of Contents