Registration Information - Sony SHAKE-100D Operating Instructions Manual

6
Perform the Bluetooth
connection on the Bluetooth
device.
When pairing is completed and the
Bluetooth connection is established,
the Bluetooth device name appears in
the display panel.
Depending on the Bluetooth device,
connection may start automatically
after pairing is completed.
You can check the Bluetooth device
address by pressing DISPLAY
repeatedly.
Notes
• You can pair up to 9 Bluetooth devices. If the
10th Bluetooth device is paired, the oldest
paired device will be deleted.
• "Passkey" may be called "Passcode", "PIN
code", "PIN number", or "Password", etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
• If you want to pair with another Bluetooth
device, repeat steps 1 to 6.
To cancel pairing operation
Hold down BLUETOOTH on the unit for
2 seconds or more until "BLUETOOTH"
appears in the display panel.
Playing music from a
Bluetooth device
You can operate a Bluetooth device by
connecting the system and the Bluetooth
device using AVRCP.
Check the following before playing
music:
– The Bluetooth function of the Bluetooth
device is turned on.
– Pairing has been completed.
1
Press BLUETOOTH on the unit
to select Bluetooth function.
"BLUETOOTH" appears in the
display panel.
42 GB
2
Establish connection with the
Bluetooth device.
Press BLUETOOTH on the unit to
connect to the last connected Bluetooth
device.
Perform the Bluetooth connection
from the Bluetooth device if the device
is not connected.
Once the connection is established, the
Bluetooth device name appears in the
display panel.
3
Press N to start playback.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playing an
audio source on the Bluetooth
device.
Notes
• When the system is not connected to any
Bluetooth device, the system will connect to
the last connected Bluetooth device
automatically when you press N.
• If you try to connect another Bluetooth device
to the system, the current connected Bluetooth
device will be disconnected.
To disconnect the Bluetooth device
Press BLUETOOTH on the unit.
"BLUETOOTH" appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
Erasing all the pairing

registration information

Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth function.
"BLUETOOTH" appears in the
display panel.