How To Assemble; How To Operate - Hoover Workman 4080 Manual

2. HOW TO ASSEMBLE

1. Insert the flexible hose into the
inlet on the main body of the
vacuum cleaner. Turn the hose
clockwise until it cannot be
turned any further (Fig.3/1).
2. Push the extension tube on
to the end of the handle.
The extension tubes can be
used together to lengthen or
shortened by using
one section of the extension
tube as required. (Fig.3/2).
3. Fit the combination floor head
by pushing onto the extension
tube. (Fig.3/3).
4

3. HOW TO OPERATE

Fully unwind the power cord.
On/Off Button
Insert the power plug into the
electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located at
the rear of the machine to turn on
and press the button again to turn
the vacuum cleaner off. (Fig.4/1)
Carpet Cleaning
For carpet and rug cleaning
press the rocker switch on the
combination floor head to raise
the brushes. (Fig.4/2 )
Hard Floor Cleaning
For hard floor cleaning, press the
rocker switch on the combination
floor head to lower the brushes.
(Fig.4/3)
5