Elation Professional Focus Spot 250R Manual page 35

3. Press [MODE/ESC], the display shows "SC01".
4. Press [MODE/ESC], the display shows "C-01".
5. Select "CEDT" by pressing [UP] or [DN].
6. Press [MODE/ESC], the display shows "OFF".
7. Press [UP], the display shows "ON".
8. Press [MODE/ESC], the display shows "SC02". You successfully downloaded
the first scene.
9. Adjust the Step-time as described above.
10. Call up the second scene in your controller now.
11. Repeat steps 5-11 until all desired scenes are downloaded.
12. Press [EXIT] to exit. The number of steps can be defined under "STEP" and the
scenes can be called up under "RUN"
©Elation Professional®
35
Focus Spot 250R™
Focus Spot 250R™