Installing The Sim And Microsd Cards; Charging The Battery - Huawei MediaPad 7 Youth 2 User Manual

Installing the SIM and microSD Cards

1. Open the SIM and microSD card slot cover.
2. Insert the SIM card with its gold contacts facing up, as indicated in the preceding figure. Push the
card inward until it clicks into place.
HUAWEI MediaPad is only compatible with standard SIM cards, whose dimensions are 0.76 mm
x 15 mm x 25 mm. Inserting a SIM card with other dimensions will damage your HUAWEI
MediaPad.
3. Insert the microSD card with its gold contacts facing up, as indicated in the preceding figure. Push
the card inward until it clicks into place.
4. Replace the card slot cover.
Do not remove the card slot cover from the tablet.
Caution
To remove the microSD card when HUAWEI MediaPad is powered on, access the Home screen, and
touch Settings > Storage > Unmount SD card. Then open the microSD card slot cover and gently
push the microSD card. The microSD card then pops out.

Charging the Battery

Your HUAWEI MediaPad uses a built-in battery that is not removable. To replace the battery,
Caution
contact an authorized service center. Do not attempt to remove it yourself.
When the battery level becomes low, charge your HUAWEI MediaPad in a timely manner; otherwise it
automatically powers off when the battery power is depleted.
3
+