Lens Replacement - Elation Professional ELAR 108PAR RGBW Manual

ELAR 108PAR RGBW
™

13. LENS REPLACEMENT

The ELAR 108PAR RGBW comes with a removable front cover that allows the lens
assembly to be changed out to achieve different beam angles.
Lens cover is held in place by two ¼ turn locking fasteners. To remove the cover; 1) Turn the
locking fasteners in a counter-clockwise direction. 2) Once the fasteners are loose lift the
cover straight up to expose the inner lens (see illustration below). 3) Locate the 8 securing
screws on the inner cover and remove them. 4) Remove the inner cover to access the lens
kit (see second illustration below). Once the lenses are changed reassemble in reverse
order.
©Elation Professional, Los Angeles Ca. 38 www.ElationLighting.com