Dmx Traits - Elation Professional ELAR 108PAR RGBW Manual

ELAR 108PAR RGBW
™

11. DMX TRAITS

DMX Operation Notes:
The fixture will function in DMX mode whenever the unit is receiving a DMX signal. Please
note that this will override all manual settings.
This unit will keep and retain the last DMX command in the event of DMX signal failure. To
reset the fixture you must turn the power off.
DMX CHANNEL TRAITS
The charts below and on the preceding pages outline the different DMX traits for the three
different DMX modes.
4-Channel mode: In this mode channel one controls all the red LEDs, channel two controls
all the green LEDs, channels three controls all the blue LEDs, and channel four controls all
the white LEDs.
©Elation Professional, Los Angeles Ca. 27 www.ElationLighting.com