Pioneer KEH-P7025 Installation Manual page 5

13.Subwoofer output
or Non Fading Output
16 cm
14.Front output
16 cm
15.Fuse
1.Multi-CD player
2.Rear output
(sold separately)
16. This Product
3.Antenna jack
4.IP-Bus input(Blue)
Blue/white
17.
To system control terminal of th
5.IP-BUS cable
or Auto-antenna relay control te
(max. 300 mA 12 V DC).
6. Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
7. Yellow
To terminal always supplied
with power regardless of
ignition switch position.
8. Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
9. Orange/white
To lightnig switch terminal.
10. Black (ground)
To vehicle (metal) body.
11. With a 2 speaker system, do not connect anything to
the speaker leads that are not connected to speakers.
Use this for connections when you have the separately
12.
available amplifier.
18. Connecting cords
with RCA pin plugs
(sold separately)
19.Power amp
(sold separately)
he power amp
rminal
20.System remote control
+ +
21.Front speaker r 21.Front speaker
≠ ≠
22.White 23.Gray
+ +
21.Front speaker r 21.Front speaker
≠ ≠
24.White/black 25.Gray/black
26.Left 27.Right
28.Green 29.Violet
+ +
30.Rear speake er 30.Rear speaker
≠ ≠
31.Green/black 32.Violet/black
+ +
30.Rear speake er 30.Rear speaker
≠ ≠
+ +
33.Subwoofe er 33.Subwoofer
≠ ≠
19.Power amp
(sold separately)
19.Power amp
(sold separately)
1.Multi-CD player
(sold separately)
6. Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
7. Yellow
To terminal always supplied
with power regardless of
ignition switch position.
8. Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
9. Orange/white
To lightnig switch terminal.
10. Black (ground)
To vehicle (metal) body.
Fig. 8
∏ qJAë
13.Subwoofer output
or Non Fading Outpu ut
16 cm
16 cm
14.Front output
15.Fuse
2.Rear output
16. This Produ ct
3.Antenna jack
4.IP-Bus input(Blue)
17. Blue/white
To system con ntrol terminal of the power amp
5.IP-BUS cable
or Auto-anten nna relay control terminal
(max. 300 mA A 12 V DC).
+
21.Front speaker
≠
26.Left
+
33.Subwoofer
≠
22.White 23.Gray
+
21.Front speaker
≠
24.White/black 25.Gray/black
27.Right
28.Green 29.Violet
+
33.Subwoofer
≠
31.Green/black 32.Violet/black
34. Note:
Change the Initial Setting of this Product (refer to the
Operation Manual). The subwoofer output of this unit is
monaural.
Fig. 9
π qJAë