Dell Precision WorkStation 610 User Manual page 110

Altitude
Operating a system at high altitude (low pressure) reduces the efficiency of forced and convection cooling and can result in
electrical problems related to arcing and corona effects. This condition can also cause sealed components with internal pressure,
such as electrolytic capacitors, to fail or perform at reduced efficiency.
Each Dell system is rated to operate at altitudes from -16 to 3048 meters (m) (-50 to 10,000 feet [ft]) and can be stored at altitudes
of -16 to 10,600 m (-50 to 35,000 ft). At 35°C (95°F), the maximum operating altitude is 914 m (3000 ft).
Dust and Particles
A clean operating environment can greatly reduce the negative effects of dust and other particles, which act as insulators and
interfere with the operation of a system's mechanical components. Also, in addition to regular cleaning, you should follow these
guidelines to deter contamination of the computer equipment:
Do not permit smoking anywhere near the system.
Do not permit food or drink near the system.
Use dust covers when the system is not in use.
Keep 5.25-inch diskettes in their paper sleeves, and keep all diskettes in a closed diskette box when not in use.
Close windows and outside doors to keep out airborne particles.
Corrosion
The oil from a person's fingers or prolonged exposure to high temperature or humidity can corrode the gold-plated edge connectors
and pin connectors on various devices in the computer. This corrosion on computer connectors is a gradual process that can
eventually lead to intermittent failures of electrical circuits.
To prevent corrosion, you should avoid touching contacts on boards and cards. Protecting the system from corrosive elements is
especially important in moist and salty environments, which tend to promote corrosion. Also, as a further deterrent to corrosion, the
system should not be used in extreme temperatures, as explained in "Temperature".
ESD
ESD results from the buildup of static electricity on the human body and certain other objects. This static electricity is often
produced by simple movements such as walking across a carpet. ESD is a discharge of a static electrical charge that occurs when
a person whose body contains such a charge touches a component in the computer. This static discharge can cause components,
especially chips, to fail. ESD is a problem particularly in dry environments where the relative humidity is below 50 percent. To
reduce the effects of ESD, you should observe the following guidelines:
When working inside the computer, wear a wrist grounding strap. If a wrist grounding strap is unavailable, touch an
unpainted metal surface on the chassis periodically to neutralize any static charge.
If at all possible, stand on a concrete floor while working inside the computer.
Use an antistatic floor mat when working inside the computer.
If it is necessary to work in a carpeted area, spray the carpet with an antistatic spray and allow it to dry before beginning to
work inside the computer.
Keep components in their antistatic packaging until they are installed.
Avoid wearing clothing made of wool or synthetic materials.
Electromagnetic and Radio Frequency Interference
Electromagnetic interference (EMI) and radio frequency interference (RFI) from a computer can adversely affect devices such as
radio and television (TV) receivers operating near the computer. Radio frequencies emanating from a computer system can also
interfere with cordless and low-power telephones. Conversely, RFI from high-power telephones can cause spurious characters to
appear on the system's monitor screen.
RFI is defined as any EMI with a frequency above 10 kilohertz (kHz). This type of interference can travel from the computer to