Monitor Specifications; Power Management Modes; Pin Assignments - Dell SP2008WFP User Manual

Left side

Monitor Specifications

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode. The monitor automatically resumes functioning when the computer detects input from the keyboard, mouse, or other
input devices. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar and USB active) Active
Normal operation
Active-off mode
Switch off
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the "menu" or "plus" buttons are pressed when in
Active-off mode.
1. Auto Detect (Analog Input)
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
This monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub Connector
USB connectors (downstream)
Horizontal Sync Vertical Sync Video
Active
Inactive
-
In Power Save Mode
2. Analog Input
In Power Save Mode
Activate the computer and the monitor to gain access to the OSD.
Right side
Power Indicator Power Consumption
Active Active Blue
Active Active Blue
Inactive Blanked Amber
- - Off
1. Auto Detect (Digital Input)
In Power Save Mode
or
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
3. Digital Input
In Power Save Mode
or
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
75 W (maximum)
38 W (typical)
Less than 2 W
Less than 1 W