Bottom View; Side View - Dell SP2008WFP User Manual

1 VESA mounting holes (100mm) (Behind
attached base plate)
2 Barcode serial number label
3 Security lock slot
4 Dell Soundbar mounting brackets
5 Regulatory rating label
6 Stand removal button
7 Cable management hole

Bottom View

1 Power connector Insert the power cable.
2 Dell Soundbar Connect the power cord for the Soundbar (optional).
power connector
3 DVI connector Connect your computer DVI cable.
4 VGA connector Connect your computer VGA cable.
5 USB upstream Connect the USB cable that came with your monitor to the monitor and the
connector computer. Once this cable is connected you can use the USB connectors on the side
and bottom of the monitor.
6 USB connector Connect your USB devices.
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor.

Side View

Use to mount the monitor.
Refer to this label if you need to contact Dell for technical support.
Use a security lock with the slot to help secure your monitor.
Attach the optional Dell Soundbar.
List the regulatory approvals.
Press to release the stand.
Help organize cables by placing them through the hole.