DeWalt XR Li-Ion DCS310-XE Instruction Manual page 11

Proper Hand Position (Fig. 4)
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand
position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in
anticipation of a sudden reaction.
Proper hand position requires one hand on the hand grip (I), with the other hand on
the main handle (H).
FIG. 4
Installing and Removing the Battery Pack (Fig. 5)
WARNING: To reduce the risk of injury, never depress the battery release button
without removing the battery pack. Depressing the battery release button without
removing the battery pack can result in the battery pack falling out unexpectedly.
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (J) into the tool handle, align the battery pack with the rails
inside the tool's handle and slide it into the handle until the battery pack is firmly
seated in the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release button (K) and firmly pull
the battery pack out of the tool handle. Insert it into the charger as described in the
charger section of this manual.
FIG. 5
Pivot Release Slider (Fig. 6)
WARNING: To avoid tool being turned on accidentally, make sure the lock-off
button (B) is engaged.
WARNING: To avoid being pinched, keep hands away from the hinge when
changing positions.
The tool can be converted into three different positions. To change positions, slide the
pivot release slider (C) to the right as shown in Figure 6 and rotate the handle portion
of the tool into any of the three positions shown in Figure 7.
FIG. 6
C
Blade Installation and Removal (Fig. 8, 9A, 9B, 9C)
WARNING: To reduce the risk of serious personal injury, lock the trigger switch
and disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
9
K
J
FIG. 7