Pack Away After Sewing; Polarized Plug Information; Changing The Presser Foot - Husqvarna Viking Viking H Class 100Q User Manual

PACK AWAY AFTER SEWING

1. Press the power switch to OFF (O).
2. Unplug the cord from the wall socket and
then from the machine.
3. Unplug the foot control cord from the
machine.
4. Place all accessories in the accessory tray.
Slide the tray onto your machine around
the free arm.

Polarized plug information

(For the USA and Canada)
This appliance has a polarized plug (one
blade wider than the other), to reduce the
risk of electrical shock. This plug will t in a
polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it
still does not t, contact a quali ed electrician.
Do not modify the plug in any way.

CHANGING THE PRESSER FOOT

Turn off the main switch
Make sure the needle is in the highest
position. Pull the presser foot towards you.
Line up the cross pin on the foot with the gap
in the presser foot ankle. Press back until the
foot snaps into place.
8
ON
OFF