Compaq 800 Series Maintenance And Service Manual page 86

5. Remove the hard drive by following these steps:
80 GB
60 GB
40 GB
30 GB
20 GB
Hard drive carrier with connector
a. Turn the notebook bottom side up with the hard drive
b. Remove the four TM2.5 × 7.0 screws
c. Slide the hard drive assembly forward
Figure 5-4. Removing the Hard Drive Assembly
Reverse the preceding procedure to install the hard drive
assembly.
Maintenance and Service Guide
Hard Drives
Spare Part Number Information
facing you.
hard drive assembly to the notebook (Figure 5-4).
from the hard drive bay.
Removal and Replacement Procedures
320038-001
316744-001
310645-001
310644-001
310643-001
310733-001
that secure the
1
and remove it
2
5–7